Do you have any questions or would you like a consultation?
Do you have any questions or would you like a consultation?
The SMA 60 is available in an electrical, compressed-air or high-frequency design. The machine is designed for handling steel, aluminum, copper and plastics. In NE-metals and steel up with a tensile strength of 600 N/mm², a chamfer width of up to 30 mm is possible. In addition to this, a radius processing of 1.2 mm to 15 mm is feasible.
The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The cutter heads are available for chamfer angles between 0° - 80°.
The processing of drill holes is already possible starting at a diameter of > 28 mm.
| Technical data | SMA 60 - BHV | SMA 60 - BER | FU 2.2. |
| Motor | 2,9 kW | 1.000 - 8.500 rpm | 2,2 kW | 2.200 - 7.800 rpm | - |
| Energy | 230 V, 300 Hz | 230 V, 300 Hz | 230 V, 50/60 Hz |
| Maximum chamfer width | 30 mm | 30 mm | - |
| Guide ball bearing | min. Ø 26,3 mm | min. Ø 26,3 mm | - |
| Cutter head | 0° - 80° | 0° - 80° | - |
| Controller | FU 2.2. | - | - |
| Weight | 13 kg | 11 kg | 9,9 kg |
| Item no. | 71203 | 71478 | 10601 |
