ASM

The centrifugal plants are suitable for small parts. Due to the higher machining intensity with deburring, they deburr 10-20 times faster than vibratory finishing machines. The centrifugal plant can be planned as a single device up to a fully automatic plant.

The grinding bodies and workpieces are accelerated through the rotational movement of the plate washer. Due to the centrifugal force, the workpieces are pressed outward and then transported up on the inner side of the system. Gravity causes these to fall back into the center of the plate washer to be accelerated again.

A noise protection cover reduces the noise and makes it possible to work in a workshop. The speed regulation ensures versatile processing options. The programmable timer rounds off the autonomous work process. The machine can be expanded with an optional paper filter and separator.

We recommend a paper filter or a fully-automatic water treatment plant for simple and comfortable water treatment. The process water is pumped in the tub and cleaned through a filter fleece or centrifugal force upon return. The separator simplifies the separation of grinding bodies and workpieces. Sorting sieves are available in many sizes. The grinding bodies are poured back into the tub after separation.

The finishing process:
Barrel finishing doe snot just mean a procedure for surface processing workpieces, but rather offers a wide range of possibilities for changing and refining surfaces. Optimal processing results are achieved through the right combination of machine as well as chips and compounds. Whether rough grinding or to achieve polished surfaces, Assfalg always offers the optimal process media.

The deburring process and surface treatment can be set according to the customer’s request depending on the shape, quality and dimensions of the ground bodies. The form of the chip must be coordinated to fit the workpiece geometry. All contours should be achieved and processed and deadlocks must be simultaneously avoided. The grinding behaviour is influenced by the shape of the chip as well - round shapes are less aggressive than pointy shapes.

The grinding performance and surface appearance are determined by the quality of the chip. The heavier or larger the chip, the rougher the surface structure and more intense the grinding performance.

The main task of the compound is to keep surfaces from workpieces and chips clean during the handling process. The selection of the compound is carried out depending on the place of use, the material to be processed and desired processing target and the properties of the compound.