Battery Lifting Magnet EPMB

The EPMB electropermanent battery lifting magnets are considered the best load lifting magnet development in the past decades at ASSFALG. They combine the advantages of permanent load lifting magnets with those from electro load lifting magnets.

Through electrical impulses within seconds, the EPMB from ASSFALG is automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet.

The electropermanent battery lifting magnet EPMB can be used in single mode as well as on magnet traverses and is an interesting alternative for 3-shift operation. With the tip function (inching), even stacked sheets can be separated starting with a thickness of 6 mm.

Through the impulse current control, the EPMB load lifting magnets do not use much energy. The effectiveness and efficiency can be seen on the one hand in the reduction of operating costs and on the other hand in a saving of time.

Its battery can be charged over night on the alternating current outlet. They work independent of a power supply and can be taken by a crane without any problems. Both flat and round material can be lifted.

The electropermanent battery lifting magnets from ASSFALG are particularly efficient through the pick-up mechanism, which works almost like a remote control. The magnet is automatically switched on with the complete relief of the crane chain, while a magnet sensor near the magnet eyelet acts as a proximity switch and triggers the switch impulse (ON/OFF pick-up mechanism). This also reduces work steps and therefore costs as well.

If you would not like the automatic mechanism, you still have the possibility to switch the magnets either directly on the device or with an optionally available remote control.